Post by jakirul83317 on Feb 15, 2024 5:20:24 GMT -5
A section of 15 x 15 cm is proposed to support the part of the roof corresponding to the covered exterior porch, where the use of the panels as a supporting element is not recommended for architectural reasons. The proposed solution is based on a construction system that in itself is much more respectful of the environment, compared to traditional construction. It is enough to be aware of the weight that the built volume will have, compared to the same building made with traditional masonry. It is evident that the balance of energy consumption between both construction systems is resoundingly favorable to light construction. To this we can also add the savings that the workers and construction material do not have to transport to the work area, as they are completely prepared in the workshop. In addition to being fundamentally built with wood: the only completely regenerable construction material, and with a product life cycle free of waste. ROOF Inclined roof formed by 10 cm of external XPS insulation supported on the skirt forming panel. Breathable waterproofing sheet type Tyvek, battening, and pre-lacquered sheet metal type Arval Chantilly 5.40.900 T. On this sheet there is a battening with an omega profile of galvanized steel on which the imitation ceramic tile sheet covering in earthy colors is screwed.
Since all the cornices of the slopes face the garden for private use, a gutter is dispensed with, rainwater pouring directly onto the land. FACADE Facade formed by 10 cm of external XPS insulation fixed on the structural façade panel. Tyvek type breathable waterproofing sheet. Finished with cement board reinforced with Euronit type fibers on battening with a galvanized steel omega Peru Email List profile fixed by screws to the structural panel, leaving a ventilated air chamber. VERTICAL FACEMENTS The structural walls of wooden panel and insulation are backed with a 13 mm thick plasterboard type plasterboard on self-supporting galvanized steel profiles with an air chamber filled with a 50 mm rock wool blanket, except in the ante-toilet rooms. , toilet and pantry, in which direct coating with the same plate is used. The divisions for compartmentalizing spaces are executed using self-supporting partitions made of 13 mm plasterboard type plasterboard on self-supporting galvanized steel profiles.
In humid rooms, an additional tiling covering is used on a moisture-resistant plasterboard. FLOORS AND CEILINGS Varnished oak board flooring, except in wet rooms where off-white stoneware tiling is used. The outdoor terrace is covered with dark gray stoneware, suitable for outdoors. Ceiling covered with 12 mm thick Garnica plywood, exposed. In wet rooms, suspended false ceiling made of 13 mm Pladur type plate, and modular suspended false ceiling that can be accessed in the pantry. In the covered outdoor areas, the white pre-lacquered Arval Chantilly type roofing sheet is visible. CARPENTRY PVC exterior carpentry fixed to a wooden cover as a pre-frame, sealed with silicone cord and airtight adhesive tape. Swinging and fixed openings. Blackout roller blind in bedroom. The glass used is Climalit 3+3/12/4/12/4 type with double chamber. The carpentry – glass assembly offers a high level of thermal insulation. The installation has been designed in order to achieve the maximum possible air tightness.