Post by khatunejannat on Feb 15, 2024 1:12:21 GMT -5
It has always been said that “ It is not the cleaner who cleans the most but the one who dirties the least ”. We can apply this same saying to the world of computing and equipment maintenance. Normally, we have to clean the equipment to keep it clean and free of dust and dirt, but good work habits will make this task easier and faster. The average time to clean the inside of a PC (tower or desktop) should be 3-6 months . Although if, for example, we change any of the components, we can take the opportunity to do a superficial cleaning. The first thing we must do is turn off the computer and remove it from the power supply. Once turned off, we will open the equipment and we will have to clean the delicate parts of the board, memory or processor with a brush (or similar tool). We can use a compressed air blower, always leaving a leak into the air (otherwise, we would be removing it instead of taking it out of the box.
It is very important not to point directly at any of the components since we could damage it with the force of the air and we will avoid tilting it or turning it over since it can drip (many Syria Email List times these cans, if you tilt them, release liquid that is very harmful to the plate). The rest of the elements or devices attached to the box can be cleaned with a cloth and if more cleaning is needed, there are liquids specialized in cleaning screens, printers, scanners, mice, IP cameras, PDAs, etc... They are liquids similar to those For example, they are used to clean glasses. These elements should also be cleaned every 3-6 months. The period is also a bit relative since each case will require time. A piece of equipment that, for example, is in a work chain in a factory plant is not the same as equipment that is in an office. The total cleaning time should not exceed 10-15 minutes. As I said at the beginning, just as important as cleaning is following a series of basic rules.
Do not eat at work (for example, crumbs are very bad for keyboards), or drink (more of the same). Always having the computer closed is very important to prevent dust from entering its interior. In addition to a physical cleaning, a logical cleaning of the hard drive should be done. It must be remembered that the speed of a computer depends on the processor, memory and hard drive, so it is very important to always have it in optimal condition . We will have the information we need to work on the hard drive, we will avoid having the hard drive very full, we will perform cleanings with ccleaner, defragmenter, chkdsk, etc... We will do these cleanings every 3-6 months. With all these tips, we will ensure that the computer is always optimized and works at maximum performance.
It is very important not to point directly at any of the components since we could damage it with the force of the air and we will avoid tilting it or turning it over since it can drip (many Syria Email List times these cans, if you tilt them, release liquid that is very harmful to the plate). The rest of the elements or devices attached to the box can be cleaned with a cloth and if more cleaning is needed, there are liquids specialized in cleaning screens, printers, scanners, mice, IP cameras, PDAs, etc... They are liquids similar to those For example, they are used to clean glasses. These elements should also be cleaned every 3-6 months. The period is also a bit relative since each case will require time. A piece of equipment that, for example, is in a work chain in a factory plant is not the same as equipment that is in an office. The total cleaning time should not exceed 10-15 minutes. As I said at the beginning, just as important as cleaning is following a series of basic rules.
Do not eat at work (for example, crumbs are very bad for keyboards), or drink (more of the same). Always having the computer closed is very important to prevent dust from entering its interior. In addition to a physical cleaning, a logical cleaning of the hard drive should be done. It must be remembered that the speed of a computer depends on the processor, memory and hard drive, so it is very important to always have it in optimal condition . We will have the information we need to work on the hard drive, we will avoid having the hard drive very full, we will perform cleanings with ccleaner, defragmenter, chkdsk, etc... We will do these cleanings every 3-6 months. With all these tips, we will ensure that the computer is always optimized and works at maximum performance.